InfoPrint 1832 / 1852 / 1872 configuration page

There are two different configuration pages you can print from many InfoPrint printers: a menu settings page (general information about the printer and its installed options) and a network setup page (specific network settings).  To print either of these pages, follow the steps shown in the user's guide:

- Press the Menu button
- Scroll down to Reports
- Press the check mark button
- Scroll down to either Menu Settings Page or Network Setup Page
- Press the check mark button

Kyocera FS-C5250DN page count

To see the total page count for a Kyocera EcoSys FS-C5250DN printer:

- Press the Menu button.
- "Counter" will be displayed on the screen; press the right arrow button (the one with the "?" icon next to it).

Apple StyleWriter test page

According to Apple's support web site, you can prit a test page from a StyleWriter printer by turning the printer off, holding down the Form Feed button, then pressing the Power button and letting go of both buttons at the same time.

Apple StyleWriter II test page

According to the StyleWriter II service manual, you can print a test page by turning the printer on and then pressing and holding the Online button (on the top of the printer) for about 6 seconds.

If that doesn't work, try the procedure mentioned on this page:  turn off the printer and hold down the Power button until the printer turns on and prints out the test page.

Apple printers

Apple made several different lines of printers, and none of them printed a "true" configuration page from the printer itself like many other brands of printers do.  But they could print startup pages or test pages, which sometimes contained page counts and other information.

LaserWriter series:
Apple's LaserWriter printers by default print out a startup page a couple of minutes after you turn them on.  This startup page typically includes information like page count, amount of memory, ROM version, and other communication settings.

In addition to the startup page, you can print a configuration page through a computer connected to the printer or the printer's network using the Apple utility.  The instructions for printing this configuration page vary by model, and the configuration page includes different information than the startup page.

StyleWriter series:
StyleWriter printers can print a test page, which might not contain anything more than the ROM version and a pattern or design.

- StyleWriter
- StyleWriter II

Color StyleWriter series:
- Color StyleWriter 4100 / 4500

InfoPrint configuration pages

Configuration pages typically show a lot of information about a printer, such as its page count, IP address, serial number, etc.  To see instructions for printing a config page from an InfoPrint printer, click on the appropriate link below.

- 1532 / 1552 / 1572
- 1832 / 1852 / 1872

InfoPrint 1532 / 1552 / 1572 configuration page

There are two configuration pages you can print from an InfoPrint 1532, 1552, or 1572: a menu settings page, which shows a lot of information about various aspects of the printer, or a network setup page, which gives detailed information about the printer's network configuration and communication protocols.  To print either of these pages:

- Press the Menu button
- Scroll down to Reports
- Press the check mark button
- Scroll down to either Menu Settings Page or Network Setup Page
- Press the check mark button

Updates

Configuration page instructions for the following printers and copiers were added this week:

- Epson Stylus C88
- HP Officejet 6500A
- HP Officejet 7310
- Ricoh Aficio MP W5100
- Ricoh MP C2030

Epson printer test pages

Epson printers don't always give you the option to print a true configuration page.  Some printers can print a test page, which may or may not show information about the printer.  Config page/test page instructions are linked to below.

Stylus series:
- Stylus C88

Stylus Pro series:
- Stylus Pro 4550 / Stylus Pro 4880 / Stylus Pro 4880c

WorkForce series:
- WorkForce WF-2860

HP Officejet 7310 All-in-One self-test report

To print a self-test page from an HP Officejet 7310 All-in-One printer:

- Press the Setup button
- Press 2 for "Print Report"
- Press 5 for "Self-Test Report"

Ricoh Aficio MP W5100 configuration page

To print a configuration page from a Ricoh MP W5100 wide format printer:

- Press the User Tools/Counter button
- On the screen, select Printer Features
- Select Configuration Page

Ricoh Aficio MP W5100 usage counter

To see how many pages or feet the Ricoh MP W5100 wide format printer has printed:

- Press the User Tools/Counter button
- On the screen, select Counter

Ricoh MP C2030 configuration page

To print a configuration page from a Ricoh MP C2030 that has the printing option installed:

- Press the User Tools/Counter button
- Scroll down to "Printer Features"
- Press the OK button
- "List/Test Print" will be displayed; press the OK button
- Scroll down to "Config. Page"
- Press the OK button

Ricoh MP C2030 page count

Although the Ricoh MP C2030 copier is in the same family as the C2050 and C2550, the procedure for viewing the page count is slightly different, since the C2030 does not have the touch screen.  To see the page count for a C2030:

- Press the User Tools/Counter button
- "Counter" will be displayed on the screen -- press the OK button

Konica Minolta bizhub C220 / C280 / C360 page count

To see the page count for a bizhub C220, C280, or C360 copier:

- Press the Utility/Counter button on the right side of the operation panel
- On the screen, select Meter Count

HP Officejet 6500A Plus configuration page

On the Officejet 6500A Plus, you can print several reports.  Two of these could be considered configuration pages -- the printer status report and the network configuration page.  The printer status report shows information like ink levels, serial number, total page count, and machine settings, whereas the network configuration page shows detailed information about the network setup.  To print either of these pages, follow the instructions below.

- On the main screen, touch Setup.  (You may have go to the right to find it.)
- Go down one screen and touch Reports.
- Touch either Network Configuration Page or Printer Status Report.

Updates

Configuration page instructions for the following copiers and printers were added this week:

- Konica Minolta bizhub C35
- Kyocera FS-C5016N
- Ricoh Aficio SP C420DN

Konica Minolta bizhub C35 configuration page

Instructions for printing a configuration page from a Konica Minolta bizhub C35 can be found on page 8-4 of the copier's reference guide:

- Press the Utility/Counter button
- On the touch screen, select User Settings
- Select Print Settings
- Select Print Reports
- Select Configuration Page
- Select Print

Konica Minolta bizhub C35 page count

To see the total page counts for a Konica Minolta bizhub C35:

- Press the Utility/Counter button
- On the screen, select Meter Count
- Use the arrow buttons to scroll through the various counts (Print, Fax, Scan, etc.)

Konica Minolta bizhub 552 / 652 page count

You can see the total page count for a bizhub 552 or bizhub 652 by pressing the Utility/Counter button and then selecting Meter Count on the touch screen, in the upper left corner.

Konica Minolta bizhub 223 / 283 / 363 / 423 page count

To view the page count for a Konica Minolta bizhub 223, 283, 363, or 423 multifunction copier:

- Press the Utility/Counter button
- If it's not already selected, select Meter Count on the touch screen


User manuals for this series:
- User's guide (network scan/fax/network fax operations)
- User's guide (advanced function operations)
- User's guide (print operations)
- User's guide (enlarge display operations)
- User's guide (security operations)
- User's guide (network administrator)
- User's guide (fax driver operations)
- Specification & installation guide
- Quick users guide (University of Mary Washington)
- PageScope Mobile for iPhone/iPad technical training guide

Kyocera Mita FS-C5016N status page

The configuration page for a Kyocera printer is called a status page, and it shows a lot of information about the printer, typically including the page count and network settings.  To print a status page from a Kyocera FS-C5016N, follow the procedure detailed on page 3-17 of the operation guide, and also described below:

- Press the Menu button
- Scroll down to Print Status Page
- Press the Enter button
- "?" will be displayed -- press the Enter button again

Konica Minolta bizhub 361 / 421 / 501 page count

To view the total page count on-screen for a bizhub 361, bizhub 421, or bizhub 501, press the Utility/Counter button on the copier's operation panel.  The page count will be displayed -- if it's not, select Meter Count on the screen.

Ricoh Aficio SP C420DN config page

The configuration page for an SP C420DN printer gives you a lot of information about the printer, including total page count, network settings, and paper tray settings.  To print the config page:

- Press the Menu button
- Scroll down to "List/Test Print"
- Press the OK button
- Scroll down to "Config. Page"
- Press the OK button

Updates

Configuration page instructions for the following printers and copiers were added this week:

- Brother MFC-8480DN
- Canon imageRUNNER 3045
- HP LaserJet Pro P1102w
- Samsung ML-2510 / ML-2570 / ML-2571N

HP LaserJet Pro P1102w configuration page

To print a config page from the HP LaserJet Pro P1102w, press the Cancel button (with the red X) and hold it down for four or five seconds.  The green light will flash, and the configuration page will print out.

Samsung ML-2510 / ML-2570 / ML-2571N configuration page

To print a configuration page from a Samsung ML-2510, ML-2570, or ML-2571N printer, press the Cancel button and hold it down for about five or six seconds, then let go.

Canon imageRUNNER 3045 configuration page

To print a config page from a Canon imageRUNNER 3045:

- Press the Additional Functions button
- On the touch screen, select Report Settings
- Select Network
- Select the box to the right of User Data
- Select Yes when asked to confirm your selection

Canon imageRUNNER 3045 page count

To see the total counter for a Canon imageRUNNER 3045 copier, press the Counter Check button.  The page count will be displayed on the screen.

Brother MFC-8480DN configuration page

There are two configuration pages that you can print from a Brother MFC-8480DN printer.  One is the user settings page, which shows general information about the device, and the other is a network configuration page, which shows network settings and communication protocol information.  To print either of these pages:

- Press the Menu button
- Press 6 for Print Reports
- Press either 5 for User Settings or 6 for Network Config.
- If prompted, press Start

Brother MFC-8480DN page count

To view the page count for a Brother MFC-8480DN printer:

- Press the Menu button
- Press 8 for Machine Info
- Press 2 for Page Counter

Updates

Configuration page instructions for the following printers, copiers, and print controllers were added this week:

- Canon imageRUNNER 5075
- Fiery EB-1357
- Ricoh Aficio 2035e / 2045e
- Sharp AR-M550U

Canon imageRUNNER 5075 configuration page

To print a configuration page from a Canon imageRUNNER 5075:

- Press the Additional Functions button.
- Select Report Settings on the touch screen.
- Select Network.
- Select the box to the right of User Data.
- Select Yes to confirm your choice.

Canon imageRUNNER 5075 page count

To see the page count for an imageRUNNER 5075 copier, press the Counter Check button on the device's operation panel.  The total page count will be displayed on the screen.

Sharp AR-M550U config page

To print a custom setting list configuration page from a Sharp AR-M550U:

- Press the Custom Settings button.
- Select List Print.
- Select All Custom Setting List.

Another configuration page, which is actually two pages -- the configuration report and system status report -- can be printed by following this procedure instead:

- Press the Custom Settings button.
- Select List Print.
- Select Printer Test Page.
- Select NIC Page.

Sharp AR-M550U page count

To see the page count for a Sharp AR-M550U, press and hold the Copy button.  The page count, along with the amount of toner remaining, will be displayed on the screen.